Yaapu FrSky Telemetry Script for OpenTX¶
This is an open source LUA script to display FrSky passthrough telemetry on Horus X10,X12, Jumper T16,T18, Radiomaster TX16S, Taranis X9D,X9E,QX7 and Jumper T12 radios using OpenTX 2.2.3.
This script can be used with FRSky, CRSF, or CRSF using the Passthru option (RC_OPTIONS bit 8 enbled when using CRSF).
Support for dual flight batteries is also provided.
Hardware details are shown in FrSky passthrough telemetry also.
Display on Horus, Jumper T16/T18 and Radiomaster TX16S
Display on Taranis
Display on QX7 and Jumper T12
Details can be found here.
Latest script releases are here.
The script is also compatible with the excellent MavlinkToPassthru converter firmware by Eric Stockenstrom which allows alternative telemetry transport methods, such as the data modem in DragonlinkRC RC systems, to feed MAVLink data into these transmitters for display by this LUA script.
Installation and Operation¶
Complete instructions are provided in the wiki pages here , but the general steps are:
Copy the SD card directory contents provided in the code section of that github site to your TX’s SD card: Horus SD for Horus, T16, and T16s style TXs; Taranis SD for all others.
On the telemetry display setup page of the TX (or telemetry widget for Horus class TXs) choose the appropriate script as the source for the display page. In the case of Taranis class, the
yaapu7script is for the smaller QX7 size displays, and the
yaapu9is for the Taranix 9x size displays.
Setup the ArduPilot side (see FrSky Telemetry)
On the TX telemetry page, “discover sensors”.
The script will run on startup. On Horus the widget will display, on others, you will need to page to the telemetry display page to see the data.
There is a configuration screen for the script that allows customization of warnings, units, etc.