Septentrio AsteRx-m UAS and AsteRx-m2 UAS RTK GPS¶
This GPS is supported in Copter-3.4 (and higher), Plane 3.7.0 (and higher) and Rover 3.0.1 (and higher). Mission Planner GCS is the only GCS to support this feature currently.
To setup this using GPS1 input (serial3) configure these parameters:
To setup this using GPS2 input (serial4) configure these parameters:
If you want to inject RTCM corrections to both GPS1 and GPS2 then use: - GPS_INJECT_TO,127
Note: Baud rate is auto-negotiated by the ArduPilot firmware, and might get set to something different than the 115200 baud.