Mandatory Hardware Configuration¶
As part of first time setup, you’ll need to configure some required hardware components. The linked articles describe the process for selecting frame orientation and configuring the RC transmitter/receiver, compass, and accelerometer using Mission Planner and how to configure the ESCs.
In addition to mandatory calibration, you may also choose to Configure Optional Hardware including battery monitor, sonar, airspeed sensor, optical flow, OSD, camera gimbal, antenna tracker etc.
- Basic System Overview
- Frame Type Configuration
- Helicopter Parameter List at a Glance
- Configuring Servo, Motor, and RC Connections with the autopilot
- Radio Control Calibration
- Accelerometer Calibration
- Compass Calibration
- RC Transmitter Mode Setup
- ESC Calibration
- Swashplate Setup
- Tailrotor Setup
- Rotor Speed Control Setup
- Internal Rotor Speed Governor
- Failsafe Mechanisms
- Flight Modes